Uninstall DM Agent

  1. Launch the DM Agent Deployment Tool.

  2. In the Connection Settings screen, the values used during the previous operation are displayed.

If you want to update the values, refer to Configure DM Agent for details of each setting in the Connecting Setting screen.

  1. In the Network Range List tab, update the IP Addresses and hostname.

    2. Ensure that only the devices you plan to uninstall the DM Agent application are listed in the table.

    To add devices to the list, click Add button and select the Range type.

    • One hostname: If selected, enter the hostname of a device.

    • One IP Address: If selected, enter the IPv4 of the device.

    • Specify IP Range: If selected, enter an IP address in [From] and [To] then specify the [Subnet Mask].

    Click (OK) to close the dialog.

  1. (Optional) You also have the option to import the device range list in CSV format. Refer to Configure DM Agent for details on importing the device list.

  2. After configuring the network range list, click [Continue].

The discovery of the address specified in the “Network Range List” is started.

You will see a bar beside the (Run Action) button indicating that the discovery has started.

After the discovery is finished, the devices are displayed.

  1. Click the Update and Install tab.

  2. From the Action field, select Unistall DM Agent.

  3. Click the checkbox beside the devices for which you want the DM Agent application to be uninstalled. Click the checkbox in the column header to check all devices in the list.

  4. Click [Run Action].

The DM Agent application uninstallation starts.

  1. Check the summary screen to see the status of the action.